Stone paint, a good paint you have been looking for as an alternative to stone!
Source: | Author:佚名 | Published time: 2024-04-26 | 302 Views | Share:
Now some new-style villas or self-built houses have more or less added some line elements as a match for the house …

Now some new-style villas or self-built houses have more or less added some line elements as a match for the house, which makes the house more characteristic and aesthetic. Generally, line elements, such as Roman columns, window covers, guardrails, window eaves, etc. are commonly used. So how should we apply OSON stone paint on these line members?

1、 Cylindrical


Spraying method: Use a small nozzle tool for cylindrical spraying, and use a dithering spray gun method to spray as much as possible around the plane with granite paint, 4D magic color paint, and then flatten with a brush. If you encounter a place where you have n’t sprayed, you can use a brush to apply a little layer, and then spray it again with a spray gun. Pay attention to the thickness of the construction should not be too thin or too thick.


2、 Three-dimensional Roman column


Spraying method: When encountering this kind of construction surface, it is necessary to use "M" linear spraying method, which is about 40 cm away from the base. After spraying on one side, spray on the other side, and the spray steering angle should be 60 degrees.


3、 Square

 

Spraying method: Due to the clear edges and corners of the square column, slight uneven spraying on the construction will cause the edges and corners to be blurred. Therefore, it is necessary to maintain a distance of 50 cm during spraying to ensure the overall aesthetic appearance of the original building.


4、平面施工 Plane construction

Spraying method: First, spray the groove part of the dividing line to finish spraying. Pay attention to spray the inside of the groove evenly. For high simulation, the right-angle part must be sprayed vertically.

After spraying the groove part, you can spray the wall facade. When spraying, pay attention to full spray at a uniform speed, keep the gun distance, and pay attention to the gun pressure, because the effect of the more spray is thicker, and the bottom will appear for less spray. After the 4D Paint is completely dry in the first coat, in order to present a more realistic stone-like effect, a second coat spray can be applied.